Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010 The NetBSD Foundation, Inc. All rights reserved. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. NetBSD 5.1_RC4 (UR) #0: Mon Oct 25 16:10:38 EDT 2010 root@uranos.nist.gov:/data/obj/sys/arch/i386/compile/UR total memory = 3069 MB avail memory = 3004 MB timecounter: Timecounters tick every 10.000 msec RTC BIOS diagnostic error 11 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100 Dell Inc. Precision WorkStation T5400 mainbus0 (root) cpu0 at mainbus0 apid 0: Intel 686-class, 2493MHz, id 0x10676 cpu1 at mainbus0 apid 1: Intel 686-class, 2493MHz, id 0x10676 cpu2 at mainbus0 apid 2: Intel 686-class, 2493MHz, id 0x10676 cpu3 at mainbus0 apid 3: Intel 686-class, 2493MHz, id 0x10676 ioapic0 at mainbus0 apid 8: pa 0xfec00000, version 20, 24 pins ioapic1 at mainbus0 apid 9: pa 0xfec88000, version 20, 24 pins ioapic2 at mainbus0 apid 10: pa 0xfec89000, version 20, 24 pins acpi0 at mainbus0: Intel ACPICA 20080321 acpi0: X/RSDT: OemId , AslId acpi0: SCI interrupting at int 9 acpi0: fixed-feature power button present timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000 ACPI-Fast 24-bit timer acpibut0 at acpi0 (VBTN, PNP0C0C): ACPI Power Button npx1 at acpi0 (FPU, PNP0C04): io 0xf0-0xff irq 13 npx1: reported by CPUID; using exception 16 pcppi1 at acpi0 (SPK, PNP0800): io 0x61 midi0 at pcppi1: PC speaker (CPU-intensive output) sysbeep0 at pcppi1 attimer1 at acpi0 (TMR, PNP0100): io 0x40-0x5f irq 0 PRT (PNP0401) at acpi0 not configured COMA (PNP0501) at acpi0 not configured COMB (PNP0501) at acpi0 not configured hpet0 at acpi0 (HPET, PNP0103): mem 0xfed00000-0xfed003ff timecounter: Timecounter "hpet0" frequency 14318179 Hz quality 2000 apm0 at acpi0: Power Management spec V1.2 attimer1: attached to pcppi1 pci0 at mainbus0 bus 0: configuration mode 1 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok pchb0 at pci0 dev 0 function 0 pchb0: vendor 0x8086 product 0x4001 (rev. 0x20) ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x4021 (rev. 0x20) ppb0: unsupported PCI Express version pci1 at ppb0 bus 1 pci1: i/o space, memory space enabled, rd/line, wr/inv ok vendor 0x10de product 0x042f (VGA display, revision 0xa1) at pci1 dev 0 function 0 not configured ppb1 at pci0 dev 5 function 0: vendor 0x8086 product 0x4025 (rev. 0x20) ppb1: unsupported PCI Express version pci2 at ppb1 bus 2 pci2: i/o space, memory space enabled, rd/line, wr/inv ok vga1 at pci2 dev 0 function 0: vendor 0x10de product 0x042f (rev. 0xa1) vga1: WARNING: ignoring 64-bit BAR @ 0x14 vga1: WARNING: ignoring 64-bit BAR @ 0x1c wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation) wsmux1: connecting to wsdisplay0 drm at vga1 not configured ppb2 at pci0 dev 9 function 0: vendor 0x8086 product 0x4029 (rev. 0x20) ppb2: unsupported PCI Express version pci3 at ppb2 bus 3 pci3: i/o space, memory space enabled, rd/line, wr/inv ok ppb3 at pci3 dev 0 function 0: vendor 0x8086 product 0x3500 (rev. 0x01) pci4 at ppb3 bus 4 pci4: i/o space, memory space enabled, rd/line, wr/inv ok ppb4 at pci4 dev 0 function 0: vendor 0x8086 product 0x3510 (rev. 0x01) pci5 at ppb4 bus 5 pci5: i/o space, memory space enabled, rd/line, wr/inv ok ppb5 at pci4 dev 1 function 0: vendor 0x8086 product 0x3514 (rev. 0x01) pci6 at ppb5 bus 6 pci6: i/o space, memory space enabled, rd/line, wr/inv ok ppb6 at pci3 dev 0 function 3: vendor 0x8086 product 0x350c (rev. 0x01) ppb6: disabling notification events pci7 at ppb6 bus 7 pci7: i/o space, memory space enabled, rd/line, wr/inv ok pchb1 at pci0 dev 16 function 0 pchb1: vendor 0x8086 product 0x4030 (rev. 0x20) pchb2 at pci0 dev 16 function 1 pchb2: vendor 0x8086 product 0x4030 (rev. 0x20) pchb3 at pci0 dev 16 function 2 pchb3: vendor 0x8086 product 0x4030 (rev. 0x20) pchb4 at pci0 dev 16 function 3 pchb4: vendor 0x8086 product 0x4030 (rev. 0x20) pchb5 at pci0 dev 16 function 4 pchb5: vendor 0x8086 product 0x4030 (rev. 0x20) pchb6 at pci0 dev 17 function 0 pchb6: vendor 0x8086 product 0x4031 (rev. 0x20) pchb7 at pci0 dev 21 function 0 pchb7: vendor 0x8086 product 0x4035 (rev. 0x20) pchb8 at pci0 dev 21 function 1 pchb8: vendor 0x8086 product 0x4035 (rev. 0x20) pchb9 at pci0 dev 22 function 0 pchb9: vendor 0x8086 product 0x4036 (rev. 0x20) pchb10 at pci0 dev 22 function 1 pchb10: vendor 0x8086 product 0x4036 (rev. 0x20) azalia0 at pci0 dev 27 function 0: Generic High Definition Audio Controller azalia0: interrupting at ioapic0 pin 16 azalia0: host: 0x8086/0x269a (rev. 9), HDA rev. 1.0 ppb7 at pci0 dev 28 function 0: vendor 0x8086 product 0x2690 (rev. 0x09) pci8 at ppb7 bus 8 pci8: i/o space, memory space enabled, rd/line, wr/inv ok bge0 at pci8 dev 0 function 0: Broadcom BCM5754 Gigabit Ethernet bge0: interrupting at ioapic0 pin 16 bge0: ASIC BCM5754/5787 A2 (0xb002), Ethernet address 00:21:9b:3a:e9:cf bge0: setting short Tx thresholds brgphy0 at bge0 phy 1: BCM5754/5787 1000BASE-T media interface, rev. 0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2688 (rev. 0x09) uhci0: interrupting at ioapic0 pin 21 usb0 at uhci0: USB revision 1.0 uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2689 (rev. 0x09) uhci1: interrupting at ioapic0 pin 22 usb1 at uhci1: USB revision 1.0 uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x268a (rev. 0x09) uhci2: interrupting at ioapic0 pin 18 usb2 at uhci2: USB revision 1.0 uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x268b (rev. 0x09) uhci3: interrupting at ioapic0 pin 23 usb3 at uhci3: USB revision 1.0 ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x268c (rev. 0x09) ehci0: interrupting at ioapic0 pin 21 ehci0: BIOS has given up ownership ehci0: EHCI version 1.0 ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3 usb4 at ehci0: USB revision 2.0 ppb8 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xd9) pci9 at ppb8 bus 9 pci9: i/o space, memory space enabled fwohci0 at pci9 dev 2 function 0: vendor 0x11c1 product 0x5811 (rev. 0x61) fwohci0: interrupting at ioapic0 pin 18 fwohci0: OHCI version 1.0 (ROM=1) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:00:d1:00:80:98:11:0a fwohci0: Phy 1394a available S400, 3 ports. fwohci0: Link S400, max_rec 2048 bytes. ieee1394if0 at fwohci0: IEEE1394 bus fwip0 at ieee1394if0: IP over IEEE1394 fwohci0: Initiate bus reset ichlpcib0 at pci0 dev 31 function 0 ichlpcib0: vendor 0x8086 product 0x2670 (rev. 0x09) timecounter: Timecounter "ichlpcib0" frequency 3579545 Hz quality 1000 ichlpcib0: 24-bit timer ichlpcib0: TCO timer reboot disabled by hardware; hope SMBIOS properly handles it. ichlpcib0: TCO (watchdog) timer configured. piixide0 at pci0 dev 31 function 1 piixide0: Intel 631xESB/632xESB IDE Controller (rev. 0x09) piixide0: bus-master DMA support present piixide0: primary channel configured to compatibility mode piixide0: primary channel ignored (disabled) piixide0: secondary channel configured to compatibility mode piixide0: secondary channel ignored (disabled) piixide1 at pci0 dev 31 function 2 piixide1: Intel 631xESB/632xESB Serial ATA Controller (rev. 0x09) piixide1: bus-master DMA support present piixide1: primary channel configured to native-PCI mode piixide1: using ioapic0 pin 20 for native-PCI interrupt atabus0 at piixide1 channel 0 piixide1: secondary channel configured to native-PCI mode atabus1 at piixide1 channel 1 ichsmb0 at pci0 dev 31 function 3: vendor 0x8086 product 0x269b (rev. 0x09) ichsmb0: interrupting at ioapic0 pin 17 iic0 at ichsmb0: I2C bus isa0 at ichlpcib0 lpt0 at isa0 port 0x378-0x37b irq 7 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo pckbc0 at isa0 port 0x60-0x64 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 fwohci0: BUS reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) ieee1394if0: bus manager 0 (me) timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0 azalia0: codec[0]: Analog Devices AD1984 (rev. 4.0), HDA rev. 1.0 audio0 at azalia0: full duplex, playback, capture, independent uhub0 at usb0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub1 at usb1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhub2 at usb2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhub3 at usb3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhub4 at usb4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered atapibus0 at atabus0: 2 targets cd0 at atapibus0 drive 1: cdrom removable cd0: 32-bit data port cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) wd0 at atabus0 drive 0: wd0: drive supports 16-sector PIO transfers, LBA48 addressing wd0: 298 GB, 620181 cyl, 16 head, 63 sec, 512 bytes/sect x 625142448 sectors wd0: 32-bit data port wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133) wd0(piixide1:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA) cd0(piixide1:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) atapibus1 at atabus1: 2 targets cd1 at atapibus1 drive 1: cdrom removable cd1: 32-bit data port cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100) cd1(piixide1:1:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA) uhub5 at uhub4 port 1: vendor 0x0424 product 0x2504, class 9/0, rev 2.00/0.01, addr 2 uhub5: multiple transaction translators uhub5: 4 ports with 4 removable, self powered uhidev0 at uhub5 port 3 configuration 1 interface 0 uhidev0: Dell Dell USB Keyboard, rev 1.10/3.52, addr 3, iclass 3/1 ukbd0 at uhidev0 wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 uhidev1 at uhub5 port 4 configuration 1 interface 0 uhidev1: Dell Dell USB Optical Mouse, rev 2.00/43.01, addr 4, iclass 3/1 ums0 at uhidev1: 3 buttons and Z dir wsmouse1 at ums0 mux 0 Kernelized RAIDframe activated pad0: outputs: 44100Hz, 16-bit, stereo audio1 at pad0: half duplex, playback, capture boot device: wd0 root on wd0a dumps on wd0b root file system type: ffs ugen0 at uhub0 port 2 ugen0: American Power Conversion Back-UPS BR1000G FW:868.L1 .D USB FW:L1, rev 2.00/0.90, addr 2 wsdisplay0: screen 1 added (80x25, vt100 emulation) wsdisplay0: screen 2 added (80x25, vt100 emulation) wsdisplay0: screen 3 added (80x25, vt100 emulation) wsdisplay0: screen 4 added (80x25, vt100 emulation)